Parlor Pieces

Although the front and back parlor collectively make up more than 25% of the first floor of the house, I'm hoping that the cash outlay over the next 6 months will not be a lot when compared to other rooms. This is mainly because I've already made most of the major purchases for the 2 rooms.



One of the first purchases I made for the house was a collection of 4 light fixtures which came out of an 1890s Victorian in Main. The guy was doing a gut-remodel and getting rid of all of the “old stuff”. I bought 3 chandeliers and a smaller, 2-light ceiling fixture. One of the chandeliers was installed in the dining room. The smaller fixture is in the upstairs bathroom.

The last 2 will be going in the 2 parlors. They are very similar, but one is little larger than the other. This works well in the parlors because the front parlor is little larger than the back parlor. Both fixtures have been rewired and are ready to go.



Years ago I also purchased two new plaster medallions to replace the originals which were ripped out when they put sheetrock up over the plaster. Again, the lager medallion will go in the larger front parlor and the smaller one in the back parlor.

The sheetrock over the plaster was possibly the worst thing that happened to the parlors. This is not so much because I think there is anything wrong with sheetrock. It's because of what the installers did to make their job easier. Not only did that pry off the plaster medallions, but they sawed off the tops of the head blocks.



Head blocks are like corner blocks except they have a crown detail that extends the block a few inches above the top piece of casing that goes over doors and windows. So they wouldn't have to fit the sheetrock around the detail, they sawed off the blocks so they were level with the top casing. Years ago I went down to Blue Ox Mill and had replacements milled.

Also at that time I had new casing milled. I needed casing for a few spots in 3 rooms to fix areas that were modified when the house was cut up in to apartments back in the 1920s. I also had replacement plinth blocks milled at that time, so all of that is just waiting to be installed. I may need to get some baseboard milled, but I am way ahead of the game when it comes to millwork for the two parlors.

Years ago I also purchased replacement hearth tiles. Just as with the dining room, the hearth tiles were beat to crap from heat, tenants, and carpet installers. I would say 40% of the original hearth tiles were just gone, and 20% were damaged beyond use. The original surround tiles are there and in very good shape, but the cast iron fireplace cover is missing, so I've already purchased an antique replacement.



Then of course there is also the pair of pocket doors and pocket door hardware I purchased, restored, and installed. That was a huge job all by itself. Stripping those doors was a lot of work and it took me nearly 3 years to find a set of antique Ives pocket door rollers.

In addition to those expenses that I don't need to worry about now, I have also already rewired both rooms for electricity and ran new cable for phone, internet, and cable TV. I also don't need to worry about dump runs for old flooring and sheetrock, because that was done years ago as well. All told, this amounts to thousands of dollars in material and months worth of work.

Expenses that remain are things like new plaster, which is relatively inexpensive. I need strip paint off woodwork and sand down and refinish the floor. These are also relatively inexpensive things to do. Then there are things like primer, paint, and new rugs. All of these things can add up, but those purchases will be spread out over time, so won't really have a major impact on the monthly budget. The big expense will be be for window treatments. There are 5 large windows, so that could set me back if I do something nice. Then of course there is new furniture. I'm not replacing everything, but it is enough that I will notice the hit on the wallet.

So really what all of this means is that if I were starting from scratch I probably wouldn't be starting at all. I would probably just let out a big sigh as I turned off the lights, closed the doors, and walked away from the rooms.

Let's Try This Again, Shall We

I actually had a rather large summer project that I didn't blog about at all. I painted the 2 story garage out back. It is really a pretty big structure. There are 2 apartments upstairs and 6 garages downstairs, so it is the size of a medium sized house.

I also put two new garage doors on the 2 garages that faced the street and did some siding repair here and there. I had to do a lot of cosmetic repair to the porch columns and I replaced door trim and corner boards. It was another one of those projects that just dragged on for months and months. It is nice to have it done, though. And now, with the push of a button, I can park my car in the garage.

Also, in October there was another blog-worthy event that got no mention here. I was wrangled in to doing the home tour for the Eureka Heritage Society. They've been after me for years to do it, ever since I won the Society's Residential Preservation of the Year award. It really was a honor, and I felt obligated to do it. Still, it was a lot of work getting ready for it. Just the thought of having who knows how many people come in to your home can be a little intimidating.

I was going to do the tour last year, but I didn't think I would have the foyer finished in time and I didn't want to commit myself and then have to rush to finish. This year, since the project was the apartment building out back there was no excuse not to do it. Trust me, I tried to come up with excuses not to do it.

I made the first floor available for the tour and it was an absolute mob scene. It lasted from 12-5 and I'm not sure how many people showed up. They estimate they sell from 300 to 500 tickets a year and it felt like everyone of them came to my house twice that day. At one point I counted more than 50 people in my house. It really was fun, though. I had some friends act as docents and I had a lot of displays set up that went over the restoration and talked about the original owners, The Petch's.

Every room on the first floor is finished now, except for the 2 parlors, which brings me to my winter-time project - my rare winter-time project. I'm going to attempt to get some things done in the parlors this winter and I'm going to attempt to blog about it. I'm not sure how much of either will actually get done, but I'm going to make an attempt.

Even though the parlors have been in a state of disrepair for the past 8 years, they have acted as my living room for most of that time. So this weekend the goal was to move my living room to an upstairs bedroom so that I can work on the parlors. Fortunately, a few years back I ran cable, phone, and internet to all rooms of the house, so it will just be a matter of moving furniture and electronics.

The goal for the parlors over the next few months will not be too ambitious. If I really went at it, I could probably finish these rooms in 6 months, but I won't be doing that. I have done quite a bit already. The sheetrock that was put over the plaster was removed 6 years ago, along with layers of flooring and wall paper. The rooms had also been modified during the apartment days of the 1920s, and that has all been undone.

The goal this winter is to just do some work on the plaster and woodwork. For the walls, I just want to remove the loose plaster and get the walls ready for new plaster. For the woodwork I want to strip off the paint. I'm still not sure if these rooms were originally painted or shellacked. Regardless, I need to get off the thick layers of dripping, gooey paint. There is also a lot of goop along with edges from when the sheetrock was put up.

If the woodwork was originally shellacked I will go back to that. If not, I will be repainting. There is circumstantial evidence that it was originally painted, but I won't know for sure for a few more weeks.

I’m Still Here….Barely

I am so burned out on the house, blogging, work, and just about everything else right now. So, since I can’t ignore the house, work, or most of everything else, the blog takes a back seat waaaaaaaay to the back of the bus.



I did get one project complete this year. Some might call it a pergola, while others may call it an arbor, but I’m calling it a neighbor hiding apparatus. There are potato vines growing up either side, and there are also the 2 mayten trees in the shot, which I planted last fall. All of this is for curb appeal when I go to sell the place in a year or two.

I also have six to seven hundred salvaged bricks from the old Daly’s department store that I will use to make a brick patio. The original plan was to use the bricks to rebuild the chimneys, but I don’t see that happening now.

The other project I have planned for the summer is to reside one short side (25 feet wide?) of the garage building, and then paint that building. This is the 2 story, 1926 building with 2 apartments upstairs and 6 garages downstairs. The second story shingles on this one short side need to be ripped off and replaced, and then 3 rows of horizontal siding needs replacing on the first floor. I had planned to hire someone to do the siding, but after getting 2 bids, with the low one being $9,800, I’ve decided to do it myself.

Oh, joy!

I may farm out the painting, but I won't know until I start getting bids. Something tells me I'll be doing that myself, as well.

Vote Early and Often

Eureka, CA – Home of The Petch House – is on the 2011 Dozen Distinctive Destinations list put out by the Nation Trust for Historic Preservation. I would like to think that The Petch House played a part in the nomination, but it really didn't. Or if it did, it was a very small part. The reality is, The Humboldt County Convention and Visitors Bureau sent in an application to be nominated, which makes it sort of a vanity nomination.

There is a contest going on where people can vote for their favorite destination. Click here to see the full list of all 12 of the distinctive cities on the list. On that page there is a link that will take you to the voting page.

Everyone will be voting for Eureka, right? Right?

The Night Time is the Right Time

Yesterday I showed the new front door windows from the inside with the light coming in. Here is what the house looks like in the evening now.



What I should have gotten a picture of was the light show that was put on this morning with the direct eastern, morning sun hitting the doors. It was almost psychedelic.

And They're In!

First, a little B&A action....





One went in without a hitch and the other one went in with a slight struggle. I need to paint the outside where the glazing putty is, but after that, these are done!

The foyer is a little darker with the new windows, but it's not too bad. They really improve the room. This is another one of those projects where after it is done I have to ask myself, "What the hell was I thinking when I decided to make these windows". It was really a lot of work, but I had to do something.

Still Wood With Glass

Here is a first look of the assembled windows. I finished the corners and oiled the wood today and then went and picked up the glass. Boy, colored glass is not cheap, but does look nice. The glass is just sitting in there right now being held in place with glazier's points. There is no glazing compound.



The glass is red, glue chip, and midnight blue English Muffle. The red glass is smooth, but has flaws and a few bubbles. The English Muffle is a textured glass. It looks much nicer when it is back lit with sunlight. It also should look nice from the outside when the lights are on in the foyer.

When I installed the colored glass in the butler's pantry doors a few years back they did not go in willingly. My solution at that time was to use a utility knife to widen the rabbet just a hair. It was not easy. In anticipation of problems this time, I asked the owner of The Glass Works in Arcata, where I bought the glass, if he could shave some of the pieces down a little if I needed it. He said, “No problem”, but as it turned out everything fit. It was a nice surprise.

Tonight I will remove the glass and primer the exterior side. Then tomorrow I will paint. Sunday is a day of rest, of course. It is The Super Bowel, after all. A friend used to say something along the lines of, “I don't go to church, but football is my religion and I practice my faith on Sundays”.

If the paint dries nicely on Sunday I may try and get on a few coats of shellac on the interior side before The Big Game starts. I don't think it is blasphimous if I only listen to the pre-game shows, but don't actually watch them.

I decided to try and do the glazing myself. As I said in an earlier post, I've glazed more than a few windows myself over the years, but I was going to take these to a glass shop because I wanted the glazing to be crisp and sharp. I can do it, but it does not really come out crisp and sharp. I've always used a putty knife and a tub of glazing compound, but this time I'm trying the stuff in the caulking tube with the special applicator tip. Fortunately, this stuff takes for ever to set up, so if it comes out looking bad, I can always dig it out and take it some place.

Installation may happen next weekend.

Go Egypt!

A new symbol of freedom

This Never Happens

I can't figure out what happened this time. Everything was going along so well with the front windows and then suddenly the whole thing went sideways on me. Chiseling out the corners is taking a lot longer than I anticipated. The glass was held up being shipped because of the odd size I ordered. Work has been ka-raze-ee this past week, so I've been in no mood to work on it in the evenings. It has just been one thing after another. This never happens!

Oh, wait, this always happens. Never mind, it's business as usual.

In a way it was an odd coincidence that things came together the way they did. If I hadn't slacked off on finishing the frames and the glass did show up on time I would have been frustrated that I couldn't install them this weekend. If I had finished the frames and the glass was late I would have been frustrated as well. As it turned out there was a harmonious synergy of laziness and incompetence that means no one is really to blame.

It's a beautiful thing.

So now the plan is to finish the frames this weekend. Get the glass midweek. Install the glass and get the glazing done. Then I will do nothing the on the windows next week because it is Super Bowl Sunday and I don't want to only finish the install half way on Saturday.

See you in two weeks!

It Just Might Work

As the old saying goes, there is more than one way to skin a cat. The method I'm using to build these windows is probably the least complicated way to do it. That also means that this method probably makes the weakest joints. I don't write this to point out that I'm making inferior windows, but rather I don't want someone to read this and think that this is the best or only way to make windows like this.



Now, I don't think these windows are going to fail any time soon, but I will be the first to admit there are better ways to do this. I chose this method because it is a nice balance between the time I can put in to the project and the skill sets I have. I get compliments on this blog regarding my carpentry skills, but really, I am no master craftsman. I accept that.

On my windows the only muntins that are solid pieces of wood are the 2 long stiles running vertically in the center. All of the rails are coped in to the stiles, and then all muntins are coped in to the rails and stiles of the frame. Rials are members that run horizontally and stiles run vertically.

There are ways to make these where the 4 main rial and stile muntins are all single pieces of wood. You could also do it where the rails and stiles of both the frame and the muntins are joined by mortise and tenons. All of my joinery is done with coping, and then secured with glue and brads. Not the strongest, but it will have to do.

Changing the bearing on the bottom gives you a different dept of cut


I used a rabbeting bit on a router to cut the rabbets where the glass will sit. It is a 1/4X1/4 inch rabbet, which I think is about as small as I could get it. You could also cut the rabbets before assembly, but that is more of a challenge. The problem with cutting them with the router after assembly is that the router leaves round corners that must be chiseled out to square.

There is a tool called a corner chisel, which I own, that will do this in one pass, but the radius left by the rabbeting bit I used is too large to work with the corner chisel I own. This means I need to work with a hammer and chisel to square up the rabbets where the glass sits. It is a lot of tedious work. On the plus side, if the coped joints I did with brads and glue hold up to the hammer and chisel I can be pretty sure that they won't fail from the door opening and closing several times a day for the years or decades to come.





After the chiseling is done I can paint the side that will face outside and oil and shellac the side that will face inside. Then it is just a matter of waiting for the glass to come in, which I ordered today. I went with the blue textured glass in the center and then red and glue chip around the edges. The guy at the glass shop told me he would have it ready by Wednesday.

If I can get the glass installed Wednesday evening then I can take it to the glass shop on Thursday to have the glazing done. I've done a lot of glazing myself, but I'm not really good enough to do it on these windows. There are 26 pieces of glass and when people knock on my front door they will be inches from it. I want the glazing to be crisp and sharp and I know my limitations.

If - and that's a big if – If I can get the windows back by Friday I can install the windows in the front doors next Saturday.

Characteristic Change

This one took only a matter of hours, but believe it or not I have changed the design one last time. Well, ok, maybe it's not the last time, but I feel good about this one.



Here is a better shot of the frames. If I had to do this over, there are a few things I would have done differently. The rails and stiles are 1-inch by 7/8ths. The 7/8ths is the width and I should have made them one and and 8th or maybe even inch and a quarter. I need to cut rabbets in them to accept the glass and it will be very tight. In fact, There is a real chance I might have to start over. I'm mentally preparing myself for that.



As for the final color, I think this is the way to go. The small clear squares will be glue chip glass. As of yesterday, the large panels in the center were going to be glue chip, and then red and blue around the perimeter. I remember now though, when I was looking at glue chip samples last week at the glass shop the owner admitted that new glue chip is not quite the same as old glue chip glass. The pattern is different enough that it is noticeable.

There is glue chip and there is also double glue chip. Both are nice, but there is something different in the way it is made now. The shop owner pulled out a large sheet and we found sections here and there that would be a good match. These isolated sections are better suited to smaller squares than a large center panel.

Another option, which I'm considering, is to put the smooth red glass in the center and the blue textured glass alternating around the perimeter with the glue chip. I like both for different reasons. Having the large red panels in the center more closely matches the big front window with its large 32-inch diameter circle of red flash glass. However, the blue glass is more obscure and so leads to better privacy.

What it may come down to is what is in stock when I go to order. I would hate to postpone the installation because I'm waiting on glass to come in. I'm hoping to be able to order glass this week. That is, if I don't completely screw these up when I cut the rabbets today.

Chiseled In Wood

Well, there's no turning back now. The design has been finalized and the frames are made.



There is still some work to be done before I can think about getting glass cut, but I think the worst is over.



I've decided to simplify the colors a bit. Yellow is gone and the final colors wil more closely match the other original cottage windows in the house.



Next up I will router the rabbet to accept the glass. Then I can order the glass. While I'm waiting for the glass I can sand and finish the frames. If all goes well I might install them in 2 weeks.

Locked & Loaded

My Scranton, PA supplier delivered the goods today so I finally have all of the hardware parts in place to finish the doors. I purchased this in “as is” condition, so they need a little restoration work before I can install them. The post for the lower bolt needs to be shortened, as well.



This project will take precedence over the windows. Once I get the locks installed I can finish the weatherization of the doors. Given the current climate (it was 31 degrees when I woke up this morning. Brrrr!), I'm sure everyone will understand.

I encourage others take a look at what Penn Antique Restoration has to offer. This is not any kind of paid endorsement. I really did get good product at a good price from someone who was easy to deal with and very accomodating. Shocking, I know.

Texture Shopping

I went and poked around a glass shop today to look at samples for the new front windows. I wish I could remember the name of the place I go to. It is on South G Street in Arcata. The gentleman who owns the place is a pleasure to deal with. I took in my netbook with pictures from the blog and in seconds he is pulling out samples flipping through catelogs.





I looked at dozens of samples and it was agreed that the texture of the glass is the important factor. The shade of color can be off a few degrees but if you put in a texture of glass that was not used in the period it will be immediately obvious. When the time comes to pull the trigger and chose the color he said I could bring some chips home so I could view them in the light of the room.

Over the weekend I cut and planed all of the wood I will need and yesterday I ordered some router bits to make the muntins. Wood selection was important because these will be relatively thin pieces of wood holding glass that is in a door. It needs to be nice, straight, tight grained redwood to do the job.

I'm hoping I can start to make the muntins next weekend and do some assembly. Once that is done, I can order the glass. If everything is in stock, that should only take a day or two. If all goes well I can have these done in 3 weeks. All never goes well, so maybe more like 4 weeks.

In the mean time, Diane from Pandora's Parlor sent me some wonderful photos of cottage windows she has added to her house. She makes them herself in many cases by replacing the glass in the top sash with colored leaded glass. I encourage you to go over and have a look. It is amazing what the effect of the colored glass has on a room. Below are photos of two of her doors. Yet more inspiration for me.

Oh no, your house would have had...

Good friends whom I genuinely like and respect start many sentences with the words above. It goes something like this.

Me: I stripped my house back to bare wood and found that the original color was white.

Them: Oh no, your house would have had an earth toned color scheme made up of at least five colors.

Me: It looks like these redwood floors are the original floors and maybe they were just shellacked and then had large rugs over them.

Them: Oh no, your house would have had wall-to-wall carpeting.

Me: I don't see any evidence that there was picture rail on the second floor of my house.

Them: Oh no, your house would have had picture rail in every room and hallway in the house.

Most of these statements are based on the fact that my house is a cut above a lot of the homes in Eureka from the period. Don't get me wrong, The Petch House is no mansion. What it is is a very nice, upper middle class Queen Anne home built in 1895. From an architectural stand point it has a lot of bells and whistles. That doesn't mean that it had every little detail that was available, though. Few, if any homes did

Because I have crawled all over this house like a monkey for the last 8 years no one living or dead but the builder knows this house better then I. When I say there is no evidence that there was picture rail on the second floor it is a qualified statement. I don't care if every single house built in Eureka in 1895 had picture rail on the second floor, mine did not.

How this relates to the front door window I'm working on now is that I have been assured by these same friends that my front door windows would have had leaded stained glass or acid etched glass in the windows. In this case there is really no way of knowing what was there because glass leaves no witness mark, nail hole, or residue with which to observe and base a theory on.

In the end I must make an assumption that their assertion is based on something. My friends are very knowledgeable about what could have been, so there is always the possibility they are right. Maybe many houses of the period had these varied accoutrements or maybe only those that were photographed had them. Maybe my house was the only house ever built that had no picture rail on the second floor. Maybe my house is the only house painted white. Maybe all of the other homes did have wall-to-wall carpet. Maybe all of the other homes did have something more than just cottage windows in the front windows on their homes.

Now though, a few people have posted comments indicating that cottage windows are very common on Victorian homes in their area or that they don't see a lot of leaded stained glass on the homes of the period. So, maybe I was wrong when in my last post I indicated leaded stained glass was very common in Victorian homes. I mean really, what the hell do I know about homes in Cincinnati, or for that matter, any other city a 100 years ago. I can only speak authoritatively on The Petch House. Beyond that I'm spouting rhetoric, conjecture, and hearsay.

In the end, what does it really matter. Anybody can do what ever the hell they want. There is no rule book to home restoration and renovation. Last I checked I still lived in a free country and if I want to gut my house, build a giant pyramid inside, sit under it and eat dog poop I can. I don't think I'll be doing that anytime soon, but you never know. If I want to put cottage windows instead of leaded or etched glass I can do that was well. In the end they are both period appropriate and neither could be considered a hack job.

I like my friends, I really do. The only reason I get uptight about it is because these comments are made while they are standing in my house. If you are going to say I'm wrong and insist that my house had picture rail on the second floor then at least take 2 minutes to inspect the bare plaster walls for nail holes or inspect the corner blocks for witness marks.

I think part of this comes from looking at books with pretty pictures and assuming they were the norm. It is like thinking that every home in America today looks like the homes in Better Homes & Gardens. Those places are the exception and not the rule. A photographer in 1895 probably would not have gone in to Joe Buggy Whip's home and taken photos of uninspired interior details. What would be the point of that.

Now, what is really bothering me about this is that I am now falling in to the trap of thinking that my house was unique because it did not have every detail known to 19th century man. I now am under the impression that every house East of the Mississippi had every imaginable detail known to the period. My mind has become coerced and corrupted by my well intentioned friends. It's like the peer pressure of high school all over again. That is, if I had gone to high school. I guess I can feel fortunate that my friends are only obsessed about Victorian homes and not heroin or bank robbery.

The debates are lively and a lot of fun. I now can't wait to finish the windows so I can have them over for dinner to argue about the front doors.

More on “Cottage Widows”

If you read yesterday's post you know I got the term “Cottage Widow” from Historic House Parts, a salvage yard in New York. I'm curious if anyone else has heard this term used to describe the Victorian era wooden windows made with colored glass. Is it a vernacular term used mainly on the East Coast or is it just used by Historic House Parts? Maybe it is a common term and I've just never heard it before. Regardless, I like it

Here in Humboldt County most of the stained glass windows you see on Victorian homes can be described as Cottage Windows. My own house has 3 and I plan to make two more for the two front doors.

A common design of this style of colored glass in the front door window around here employs a uniform series of glass squares around the perimeter with a large pane of clear glass in the center. I'll see if I can get some pictures soon. Although my front door was not originally done in the cottage window style, other cottage windows on my house have a similar design (See yesterday's post).

The big difference between mine and a lot of others you see around here is that on mine the panes of colored glass are not uniformly sized all the way around. There are squares at the corners and rectangles on the sides and top. This is what drove the original design for my front doors. See below.

Original Design


Then after looking at some of the samples at Historic House Parts I changed the design of my windows. My main concern with trying to do the uniform squares all the way around is that it does not leave much room for error. If I limit the design to one size of square I could end up with a window too big or too small. For example, if I had 7 panes going up the side and each square is off by a quarter of an inch that adds up to an inch a three quarters too tall or too short.

Examples of Cottage Windows from Historic House Parts




Design Round Two – Inspired by Historic House Parts


With this design I can play with the length of the center panes to make sure the window fits the existing opening on the door. The pinkish glass was added as well, and is taken from the big front window that is original to my house (See yesterday's post). The real trick may be matching the texture of the 1895 glass.

The New Frontdoor Window

So, I've decided to venture in to the mysterious and intimidating world of stained glass. {Deep Breath} I'm going to attempt to make my own stained glass windows for my front doors {Exhale}.

Now, a lot of you probably have one or two ideas of what it takes to make stained glass or what are the requisite parts of a stained glass window. From what I can tell, stained glass falls largely in to three broad categories of construction. Old school stained glass uses lead came. These are the 'H' shaped pieces of lead (sometimes zinc) that are soldered together around the pieces of glass. The more modern method, which is a late 19th or early 20th method, uses copper foil that is wrapped around the edges of the glass and then soldered together. The last method uses wood instead of copper, zinc, or lead to separate and secure the pieces of colored glass. I believe these would be called muntins.

If you lived Back East 100+ years ago the leaded stained glass windows could be easily ordered from suppliers in almost every size and shape imaginable. There were huge catalogs of designs to chose from and even modest homes might have a front window with a leaded stained glass sash. It was quite popular.

A very eclectic design from The Carson Mansion (1887)


There are some fine examples of Victorian era leaded glass in Eureka, but really it is limited to the mansions. If you walk around Eureka, almost every home you see from the turn of the century has at least one stained glass window on it. What you don't see though, are a lot of the leaded stained glass. Most here are made with wood.

Two in the parlor


Better view of the large parlor window


Upstairs hallway


Close up of glue chip pane in hallway


Close up of blue glass


With lead came the designs can be as intricate and elaborate as you want. With wood, the designs are limited to using mainly squares, rectangles, diamonds, and the occasional circle. Historic House Parts of New York refers to these simple wood and colored glass windows as “Cottage Windows”. The Petch House came with 3 of them originally, as seen above.



In keeping with the original windows, above is my first design for the front door windows I want to make. The muntins will be redwood, of course. These are roughly 38X22. The corner squares are roughly 5X5. I added yellow to the mix because I have yellow glass left over from the butler's pantry cabinets. Next week I'm going to visit a local shop to see if they have anything that matches the purple glass that is in the big front window. I would like to match the color, but also that texture.

To see some eye-popping original Victorian windows from the 19th century visit the links below. I will not be held responsible for damage to any computer equipment while viewing these sites. Cover the keyboard with a towel and have your drool buckets handy. You have been forewarned.

Easy Boo (UK)

Historic House Parts (US)

New Supplier

Believe it or not the front door still is not finished. Of course, I haven't worked on it a whole lot since October, but still, this project is really dragging, even by winter standards.

I finally found a lockset I liked and was willing to buy. Sure, I could spend $500+ of the finest restored 1890s lockset, but I think we all know that is not going to happen. It's not that I can't afford it, its that I don't want to. If the last thing I had to do on this house was to buy a lockset and install it, then the sky would be the limit.

As it is, I do more major projects in 1 year than most people do in a decade. For me, thinking about funding for future projects means thinking about what I will be doing next month, not next year or next decade. I must always broaden my tunnel vision and keep the big picture in mind.

So I searched and I waited. I found a few promising items over the past few months and made some low-ball bids on eBay that didn't pan out. No biggie. I've lost a lot more auctions than I've won. Then a few weeks back the set below showed. Fully restored and ready to install. Really, very nice. Installation was a breeze and for the first time in decades the front door does not rattle when the wind blows. I don't have to giggle the knob to get the lock to engage. Simply close gently and listen for the click. It's a beautiful thing.



Not a great price, but a good price. Very fair. Both the buyer and seller knew what they had and what it was worth and a peaceful and prosperous transaction ensued. You gotta love commerce when everyone ends up happy.

Of course, I needed other locks for this door. There are the two slide bolts that keep the stationary door in place. These have been a challenge to find. Really, the top one has been the challenge. I need a 24X1.25 inch mortised slide bolt. I beginning to think that the original bolt was custom made for my house. OK, not really, but I have found that that size bolt just does not exist in the salvage hardware world. If I needed a 20-inch long bolt or shorter I would have 100s to chose from.

I eventually found and bought one that was listed at 18X1.25 inches only to find out it was mislabled on the web site. Very frustrating, but it was returned for a full refund. The 1.25 inch is the really important measurement. I can fill in at the bottom with wood or even a piece of the original bolt. It must be 1.25 inches wide though, or I can't mount it.

So after I bought the lock From Filip at Penn Antique Restoration in Scranton, PA I asked if he had any locks that would fill my needs. In no time at all a few pictures arrived with a very nice selection to chose from. Two were 20X1.25 inches and in the same pattern as the original lock!

Sold!


After a few more emails to confirm size and condition, and before I was given a price, I was asked if I wanted them as-is or cleaned and restored. I love this. I love being given the option and I also love dealing with people who understand that time is money. Some people think they yank something out of their attic, slap it on eBay, and get top dollar for it.

As many of you have already guessed, I'm buying these in original, as-is condition. After some grunt work to get them in shape I can mount them and then finish the weather stripping. After that I can replace the glass and finish these front doors once and for all!

One Box To Rule Them All

For years I have wanted and worked towards a wired home. I want to have music, video, photos, internet, and other types of data available in all rooms at all times, but I didn't want a computer in every room, nor do I want to - nor can I - spend thousands on some high-tech, off-the-shelf system that is operated by sleek, wireless touch pads like something out of a James Bond movie.

So I pulled wires for cable TV, internet, and phone in to 7 rooms of the house. The confluence of all of the cables is in a cabinet in the butler's pantry where it all meets in a Steren home networking box. This was a good start. The router in there is wireless N, but I've found that connection rates drop by as much as 50% just 2 rooms away, so all of the wires are worth it in my opinion.

Next, for $199 I plugged an HP Media Vault in to the router. This is an NAS with Media Server, for the techno-savey out there. For others, think tiny computer with no keyboard, monitor, or mouse and just one button on the front. The HP Media Vault works as a file server, media streamer, and as a print server for the printer that is plugged in to it. This is all located in the same cabinet as the Steren box. It is pretty much idiot proof and works great. There is little or no configuration. Just plug everything in and turn it on. Anything I put on the Media Vault is available to any computer in the house and any computer in the house can print to the printer plugged in to it Media Vault.

Next, I installed a $50 TV card in to my PC. This allowed me to record TV in the same way Tivo or a DVR would. The software downloads program guides from the cable company and it is just a matter of clicking on a show to record it. You can set it up to record the same show every night or week. The shows are recorded to the Media Vault. Along with all of my photos, and CDs I ripped, the Media Vault now has all of my media and documents. I hate Suddenlink cable and shudder at the thought of giving them more than the $23 I pay for their service now, so I don't get a DVR from them. I'm half tempted to get an HD antenna and dump Suddenlink altogether.

Now I needed something to bring it all together. I don't mind laying in bed with the netbook propped on my chest to watch a TV show, but that would never cut it for the parlor.

I briefly looked at Google TV, but it kind of seems like it is Not Ready For Prime Time. Even if I went that way, I'm not sure it would have accomplished everything I wanted. What I ended up buying was a Sony Playstation 3 for $299. Who would have thought a game console would have been the key to bringing everything together in the parlor.

Here is a list of what the PS3 will do:

• Play music CDs
• Play DVDs
• Play Blue Ray discs
• Built in web browser
• Stream TV and movies off Netflix
• Stream TV off Hulu
• Stream recorded movies off the Media Vault
• Stream recorded TV off the Media Vault
• Stream music ripped from CDs off the Media Vault
• View photos off the Media Vault

All of that and it is actually smaller than the DVD player it replaced! If that weren't enough, the remote is wireless, not infrared, so you don't need to point at the TV, and it recharges when it is plugged in to the console, so you never need to replace batteries!

Oh, and apparently the PS3 will also play video games, but I haven't gotten that far yet. Don't own any video games, not a problem. You can download them from the PS3 store that is accessed through the console. There are free demos of a lot of the games, too. This is probably starting to read like a paid endorsement for the Sony® PlayStation® 3. I wish it was, because I could use the money, but it isn't. The PS3 really does all of that and it does it well. I think what impressed me the most was how fast the system comes up. It is minor, but this is something that has always bothered me about my DVD player. After pushing the On button I had to wait close to 20 seconds for the tray to slide open. What the hell is it doing in all of that time?!?!

The Netflix app is really impressive. I'm amazed at the quality of the picture. For $9.99 a month I can stream what I want and get DVDs in the mail, which are ordered through the PS3! When streaming TV there is a momentary laps in quality in the first 10 seconds and then after that the quality is as good or better than live TV. I have low-end DSL from At&T for $19.99 a month. If I upped the service from AT&T, that first 10 seconds would probably improve, but that's probably not going to happen.

So, I'm not a gamer, I own no video games, but I own a PS3 and I love it! Go figure.

Front Door Very Close

I need a lockset, some weather stripping, a new threshold, and a slide bolt, but the worst is behind me.



This is what it looked like when I started. It is hard to tell, but the paint is terrible. That is plywood nailed to the bottom. There is a crusty plate with the original doorknob. The biggest insult is the modern, crappy, brass plated mail slot. The slot cover is bad enough, but the worst thing is, I think this was added just a few years before I bought the house. Meaning, someone took a saw to the door very recently and added the slot.



Here it is with most of the paint stripped off. What you are seeing are remnants of the original 1895 black/gray/white paint job.





Here it is primed and with a new mail slot. Well, different mail slot. That is a cast bronze slot from the 19th century,



And here it sits today. The colors are the same as on the rest of the house: Clarey Sage, Basil, and Livable Green. With any luck I can finish this up this weekend.